Ci Tech Pro 6545 conveyor x-ray scanner  Ref: 1006
	tunnel opening 25.6" wide (650mm) x 17.7" high (450mm) sensitivity 36 AWG guaranteed using new ASTM F-792 spatial resolution 1mm using new ASTM F-792 test bag penetration 22 mm steel guaranteed using new ASTM F-792 test Bag contrast sensitivity IT-H4 guaranteed IT-H3 typical, 4096 gray scale levels dose inspection 0.1 mR typical material discrimination Dual-Energy HI-MAT + Organic=Orange, Inorganic=Blue, Mixed=Green power requirements 110 - 120 VAC (6 Amps. max) 220 – 240 VAC (3 Amps.) x-ray generator voltage 160 kVp tube, operating at 140 kVp tube current 0.8mA cooling sealed oil bath duty cycle 100% beam direction vertically upward x-ray detector 1280 photo diodes in an “L” shaped configuration environmental conditions operating temperature -17°C- 50°C storage temperature -40° C to 70°C humidity Less than 95% computer specifications minimum configuration pentium-IV, 3 GHZ, Ram: 256Mb, HDD: 40 GB, CD ROM, FDD: 1.44Mb video displays dual 19” SVGA high resolution, low radiation, flicker free flat monitors physical specifications length 87.49 inches (222.4 mm) height 50.50 inches (1282.7mm) width 32.38 (822.3mm) weight approximately 990lbs (450 Kgs) conveyor speed 45 feet per minute(13.5 meters per minute) conveyor capacity 220lbs (100kg) construction Steel frame on casters health and safety all x-ray systems are certified to be in full compliance with all international radiation safety requirements and external emissions limits. typical leakage radiation is less than 0.1 mR/hr compared to a maximum of 0.5 mR/hr permitted. film safety guaranteed for high-speed films up to ISO1600 operational standards complies with all published international standards including the U.S. federal aviation administration standards, “use of x-ray systems” (federal standards 14 CFR 108.17 and 14 CFR 129.26)