Ci Tech Pro 5335 conveyor x-ray scanner  Ref: 1007
	tunnel opening 21 inches wide (53cm) x 14 inches high (35 cm) sensitivity 40 AWG typical; 38 AWG guaranteed; 40 AWG in 24 bits spatial resolution 1mm using new ASTM F-792 test bag penetration 0.38" (9..5 mm min, 11 mm typical) using new ASTM F-792 test Bag contrast sensitivity 65,000 tones standard, 2 million with 24 bit system dose inspection 0.1 mR typical material discrimination Dual-Energy HI-MAT + Organic=Orange, Inorganic=Blue, Mixed=Green power requirements 110 - 120 VAC (6 Amps. max) 220 – 240 VAC (3 Amps.) x-ray generator voltage 110 kVp tube, operating at 90kVp tube current 0.8mA cooling sealed oil bath duty cycle 100% beam direction vertically upward x-ray detector 1024 photo diodes in an “L” shaped configuration environmental conditions operating temperature 32° to 113°F to 45°C storage temperature 32° to 113°F to 45°C humidity 20 - 95%, non-condensing computer specifications minimum configuration pentium-IV, 2.4 GHZ, Ram: 256Mb, HDD: 40 GB, CD ROM, FDD: 1.44Mb video displays s ingle 19” SVGA high resolution, low radiation, flicker free flat monitor physical specifications weight approximately 500lbs (227Kgs) conveyor speed 45 feet per minute(13.5 meters per minute) conveyor capacity 200lbs (90kg) construction Steel frame on casters health and safety all x-ray systems are certified to be in full compliance with all international radiation safety requirements and external emissions limits. typical leakage radiation is less than 0.1 mR/hr compared to a maximum of 0.5 mR/hr permitted. film safety guaranteed for high-speed films up to ISO1600 operational standards complies with all published international standards including the U.S. federal aviation administration standards, “use of x-ray systems” (federal standards 14 CFR 108.17 and 14 CFR 129.26